Ui24R Firmware Update v3.3

Last Updated: Jun 01

Soundcraft Ui24R firmware update v3.3.8293

Changes the to firmware include:

- Performance improvements to web server stability
- Performance improvements to WiFi frequency accuracy
- Performance improvements to clocking stability, including clocking during Cascade operations

v3.3.8293 is approved for use on all Ui24R hardware.


Software Update Instructions for Ui24R

  1. Download the uiupdate file from the Soundcraft website. The format is:
    uiupdate-k-3.3.8293-ui24v3.zip
    (leave in zip format)
  2. Copy the file to a USB media device suitable for connection to a Ui mixers USB port.
    Note: The file can reside in any directory. Any USB port on the mixer is acceptable.
  3. Ensure a client device is connected to the Ui mixer GUI.
  4. Connect USB media to the Ui mixer
  5. The GUI display will display that the USB device has been mounted. After the stick has been read (maybe 10 more seconds) the update will be recognised.
  6. The GUI will prompt you if you would like to update the Ui mixer. Options are Ok/Cancel.
  7. Select OK to confirm
  8. The Ui mixer will perform a firmware update
  9. The GUI will present a message stating whether the update has been successful or not.
  10. You must power cycle the unit and reconnect the client device. Power off for at least 10-15 seconds before powering back on. 
    Note: A flick of the power off/on will almost always fail to boot properly, and can get stuck in continuous flashing blue wifi led. Make sure to power off, wait 10-15 seconds, then power on. The blue wifi led will pulse/flash for around 10-15 seconds then remain on.
  11. You can now browse to the about page to see the new firmware version information.

 

Previous Versions


Related Products

  • Ui24R

    Ui24R

    24-channel Digital Mixer/USB Multi-Track Recorder With Wireless Control

Previous Versions