Mix and Matrix outputs are provided on 4 impedance-balanced XLR connectors . The Mix inserts are pre-fader. A pair of unbalanced -10dBV jacks allow the performance to be recorded. The six Aux master outputs are also impedance-balanced.

Matrix Sends and Masters

Two rotary controls allow the Mix L and R busses to be fed to the Matrix outputs, either as a mono sum or individually to Matrix A and B respectively. The Matrix masters above govern the level of Matrix A and B outputs. Both may be soloed after the fader.

Talkback Section

A balanced XLR connector allows a microphone signal to be routed to Aux 1-2, Aux 3-4, the Mix, or the Groups. A rotary control governs talkback level.

Auxiliary Masters

Six rotary controls govern the overall level of each Aux master. Each can be soloed after the fader for monitoring. In addition, Auxes 3 and 4 can be switched post-fader, post-EQ globally.

Mute Masters

Four switches control the status of the Mute Groups. The associated LED illuminates when any mute group is active.

Headphones Section

A jack is provided for use with headphones with impedances of 200 Ohms or greater. Level is controlled by a rotary fader. The PFL master LED illuminates if any solo is active.

Master Faders

The Mix L & R levels are controlled by 2 custom-built 100mm long throw linear faders.